|
|
|
|
BS PROPS BS Props fully conform to the requirements of BS 4074: 1982 and have been tested in accordance with BS 5507 Part 3: 1982
BS Props are manufactured from high quality material with a powder coated finish for long life and are highly resistant to site wear and tear.
BS Props can be used on all types of building and construction or for any use where an adjustable load bearing member is required.
The high tensile steel pin is located on the inner section for adjustment. The cast collar located below the pin gives fine adjustment for levelling or striking.
The rolled tread ensures no loss of material or strength at this critical point.
|
|
|
|
|
|
|
|
Minimum Ext |
Maximum Ext |
Weight |
BS PROPSIZE 0 |
1.07m |
1.82m |
11.00kg |
BS PROPSIZE 1 |
1.75m |
3.12m |
16.70kg |
BSPROP SIZE 2 |
1.98m |
3.35m |
18.40kg |
BS PROP SIZE 3 |
2.59m |
3.95m |
20.20kg |
BS PROP SIZE 4 |
3.20m |
4.87m |
24.20kg |
|
|
|
PLEASE RING 01724 840609 FOR PRICES ON TRENCH STRUTS |
|
|