THE BAR SYSTEM
TIE BAR SYSTEM
15/20mm
CUT TO LENGTH SERVICE
ALSO AVAILABLE
- SHE BOLTS
- CRIMPED TIE RODS
- WELDABLE ANCHORS
- PLASTIC SHIMS
Fender Steel offers a wide range of formwork accessories. With over 30 years of experience we are at hand to offer you practical help and assistance for your construction requirements.
All types of reinforcing steel, accessories and concrete products are supplied to the commercial, industrial, housing and engineering sectors.
Our range of formwork accessories include: Tie Bars, She Bolts, Crimped Tie Rods, Weldable Anchors, Plastic Shims, Clamps, Hex Nuts, Anchors, Water Bar Connectors.
HEX’ NUT
ANCHOR
WATER BAR CONNECTOR
TIE BAR
TIE BAR
Formwork Tie Rod bars are available in two diameters 15 and 20mm. bars are carried in stock lengths that can be cut to size.
CONES
These cones are used at the ends of the rigid sleeve and can be easily extracted after removal of formwork, to form a chamfered recess for subsequent grouting.
| Tube i / d |
|---|
| 22 |
AQUAFIX / SUPA-PLUG
AQUAFIX
Aquafix is a stopper made from a resilient synthetic rubber (non biodegradable).
SUPA-PLUG
Is a polymer modified cementitious powder designed specifically for plugging tie holes. When mixed with water it forms a cohesive easy-to-apply shrink compensating compound and cures to develop a strongly bonded watertight plug to form an effective seal.
RIGID SLEEVE
RIGID SLEEVE
This sleeve is a rigid PVC tube, supplied in 2 metre lengths which can be easily cut to the required size.
Also acting as a spacer to ensure correct width of wall.
| Tube i / d - o / d |
|---|
| 20 / 24 |
| 22 / 26 |
| 26 / 30 |
CHAMFER EDGE PROFILES
FORMWORK ACCESSORIES
CHAMFER EDGE PROFILES
An extruded plastic section for forming chamfered corners to columns and beams.
The optional nailing flange provides easy fixing to corner moulds and
safe stripping thus ensuring maximum re-use.
NOTE: Supplied in 2.5m lengths.
| Height mm h |
|---|
| 20 |
| 25 |
| 30 |
| Height mm h |
|---|
| 20 |
| 25 |
| 30 |